Aziz Bench

JST VH connector

Power connections in appliances, TVs and power supplies: up to 10 A per contact with 16 AWG wire.

Connector
JST VH
3.96 mm · wire-to-board
Pitch
3.96 mm
Per contact
10 A
Contacts
2–11
JST VH
3.96 mmJST VH

Specifications

Pitch3.96 mm
Contacts2–11
Rowsone
Current per contact10 A (AWG 16)
Voltage250 V
WireAWG 22–16
Latchyes, a tab to press
Matingwire-to-board
MakerJST
HousingVHR-nN
ContactSVH-21T-P1.1 · SVH-41T-P1.1
Board headerBnP-VH · BnPS-VH

In part numbers, n or nn is the number of contacts.

Lookalikes and how to tell them apart

3.96 mm pitch with a lock, single row. Molex KK 396 has the same pitch; Mini-Fit Jr is 4.2 mm and usually comes in two rows.

ConnectorPitchLatchPer contact
JST VH3.96 mmyes, a tab to press10 A
Molex Mini-Fit Jr4.2 mmyes, a tab to press9 A
Molex Micro-Fit 3.03.0 mmyes, a tab to press8.5 A
Molex KK 2542.54 mmno, held by friction4 A

Before you plug it in

Inside appliances and power supplies these connectors can carry mains voltage. Unplug the device and wait for the capacitors to discharge before you touch them.

Crimp terminals need the crimper die made for their size: pliers crush them and the contact works loose. Housings and terminals of different series don’t mix, even at the same pitch.

The current rating is a maximum per contact, at the wire size the maker states. With thinner wire, or with every contact carrying current, stay well below it.

Open the connector identifier →Not sure it is this one? Enter the pitch, the contacts and where you found it: the identifier compares 22 connector families.

Other connectors

Frequently asked questions

What is the pitch of the JST VH connector?

3.96 mm between the centres of two neighbouring contacts.

How much current can a JST VH connector carry?

10 A per contact with AWG 16 wire, at up to 250 V, according to JST.

Figures from the makers’ catalogues and datasheets. Ratings are maxima: derate for thin wire and for many loaded contacts.