Specifications
| Pitch | 1.25 mm |
|---|---|
| Contacts | 2–15 or 10–40 |
| Rows | one or two |
| Current per contact | 1 A |
| Voltage | 150 V AC |
| Wire | AWG 32–26 |
| Latch | no, held by friction |
| Mating | wire-to-board |
| Maker | Hirose |
| Housing | DF13-nS-1.25C |
| Contact | DF13-2630SCF · DF13-3032SCF |
| Board header | DF13-nP-1.25DSA · DF13-nP-1.25DS · DF13C-nP-1.25V |
In part numbers, n or nn is the number of contacts.
Lookalikes and how to tell them apart
Same 1.25 mm pitch as GH and PicoBlade, without a latch. Hirose also makes it in two rows, from 10 to 40 contacts.
| Connector | Pitch | Latch | Per contact |
|---|---|---|---|
| Hirose DF13 | 1.25 mm | no, held by friction | 1 A |
| JST GH | 1.25 mm | yes, a tab to press | 1 A |
| Molex PicoBlade | 1.25 mm | no, held by friction | 1 A |
Before you plug it in
Crimp terminals need the crimper die made for their size: pliers crush them and the contact works loose. Housings and terminals of different series don’t mix, even at the same pitch.
The current rating is a maximum per contact, at the wire size the maker states. With thinner wire, or with every contact carrying current, stay well below it.
Open the connector identifier →Not sure it is this one? Enter the pitch, the contacts and where you found it: the identifier compares 22 connector families.
Other connectors
JST SH JST GH Molex PicoBlade JST ZH JST PH Grove JST XH JST SM JST RCY Molex KK 254 Dupont Servo plug Molex Micro-Fit 3.0 JST VH Molex Mini-Fit Jr XT30 XT60 XT90 Deans (T-plug) Anderson Powerpole DC barrel plug
Frequently asked questions
What is the pitch of the Hirose DF13 connector?
1.25 mm between the centres of two neighbouring contacts.
How much current can a Hirose DF13 connector carry?
1 A per contact, at up to 150 V AC, according to Hirose.
Figures from the makers’ catalogues and datasheets. Ratings are maxima: derate for thin wire and for many loaded contacts.