Specifications
| Current per contact | 15–45 A |
|---|---|
| Voltage | 600 V |
| Wire | AWG 20–10 |
| Latch | no, held by friction |
| Mating | wire-to-wire |
| Maker | Anderson Power Products |
| Housing | 1327 |
| Contact | PP15 · PP30 · PP45 |
Lookalikes and how to tell them apart
Genderless: two identical housings mate with each other, and they slide together sideways into blocks. Housing colours mark polarity.
| Connector | Pitch | Latch | Per contact |
|---|---|---|---|
| Anderson Powerpole | — | no, held by friction | 15–45 A |
| XT90 | — | no, held by friction | 45 A |
| XT60 | — | no, held by friction | 30–35 A |
Before you plug it in
The current rating is a maximum per contact, at the wire size the maker states. With thinner wire, or with every contact carrying current, stay well below it.
Open the connector identifier →Not sure it is this one? Enter the pitch, the contacts and where you found it: the identifier compares 22 connector families.
Other connectors
JST SH JST GH Molex PicoBlade Hirose DF13 JST ZH JST PH Grove JST XH JST SM JST RCY Molex KK 254 Dupont Servo plug Molex Micro-Fit 3.0 JST VH Molex Mini-Fit Jr XT30 XT60 XT90 Deans (T-plug) DC barrel plug
Frequently asked questions
How much current can a Anderson Powerpole connector carry?
15–45 A per contact, at up to 600 V, according to Anderson Power Products.
Figures from the makers’ catalogues and datasheets. Ratings are maxima: derate for thin wire and for many loaded contacts.